🛠️ How to Edit AP and Antenna Settings on the Canvas

📡 Step 1: Open Antenna Details

• Click Add AP and select Fixed Wireless, Outdoor
• Select an appropriate vendor
• Click Antennas, then under Sector 1 click Antenna Details

🔧 Step 2: Configure Antenna Parameters

• The Antenna Details screen shows the antenna's attributes
• Set the Azimuth and Elevation of the antenna
• View the 3D rendering of the antenna pattern
• Hold the left mouse button to pan and tilt the model

📶 Step 3: Configure Beam Patterns (Massive MIMO)

• For a Massive MIMO configuration, select the appropriate AP
• Click Sectors, then Antenna Details
• The antenna attributes appear the same as before; because this is a Massive MIMO antenna, you can now select beam patterns
• Select a beam relevant to your setup, click Include, and it is added to the plot
• You can select as many beams as needed — click, Include, then Apply
• In the dropdown, selected beams are marked with an asterisk (*)
• Scroll down to the Port Mapping area to see how everything is connected
• Proceed to placing the AP

🔄 Step 4: Change or Replace an Antenna (Multiple External Antennas)

• To add an AP with multiple external antennas, click Add AP
• Click Sectors, then Antenna Details
• The antenna model now shows a Change button — click it to change the antenna as needed
• Browse the list of available antennas
• Filter or search for a specific model by beamwidth, frequency, or external/internal
• Add additional filters such as manufacturer, max gain, port count, and band support
• Select the appropriate antenna and click Replace

📋 Step 5: Clone a Sector

• To clone an existing sector, click Clone Sector
• Make the relevant changes and click Add AP

✅ The antenna is now configured for the selected AP and ready for placement.

Need Help?

Contact our support team at support@eino.ai