🧱 How to Add and Edit Walls

🚫 Step 1: Turn Off the Heatmap

• Disabling it prevents unnecessary recalculations while drawing walls.

✏️ Step 2: Add a Wall Type

1. Go to the Wall Tool (or press W).

2. Click Add Wall Type:

   • Example: Concrete

   • Set thickness per foot and height

3. Click Save — this creates a wall template

🧱 Step 3: Draw the Wall

1. Select your wall type

2. Click once to create an elbow (turning point)

3. Double-click to finish the wall

4. Repeat as needed with other materials (e.g., Drywall)

🖱️ Step 4: Adjust and Refine Walls

• Click on the last point to remove it if needed

• Press Esc once:

  • You're still in wall mode, but can now select/move/adjust walls

🔲 Step 5: Box-Select and Bulk Edit Walls

• Drag-select walls

• Edit based on:

  • Material

  • Height

  • Thickness

• If selected walls have mixed types, you can still apply a uniform update

⚙️ Step 6: Use the Wall Menu

• Use the 3-dot menu on any wall group

• Apply new materials or thickness globally

🧭 Step 7: View in 3D

• Switch to 3D View to visualize wall placement and height

✅ Step 8: Re-enable the Heatmap

• Once drawing is complete, turn heatmap back on

• The RF model is updated based on your newly placed walls